Published on Monday, 05 December 2016 11:43
How to choose a Solar Charge Controller
In an era where alternative energy sources gain more ground, it is wise to learn about them in order to make good use of them in order to cut the costs of the regular means and contribute more towards being environment-friendly. One of these is solar power, which can be utilized via photovoltaic systems. These are battery-based, so choosing an appropriate charge controller is a key factor to an efficient and durable solar kit. What it does is help in protecting your batteries from unwanted damages, replacements, and other costs, as well as ensure that they are properly, fully and safely powered.Read more: How to choose a Solar Charge Controller
Published on Wednesday, 25 May 2016 12:08
How This Solar Battery Charger Works and How to Use ItThink of the Amp like a very small solar power plant. It's small sufficient to bring with you on the road, but it includes all the parts needed to accumulate and store power from the sun. It converts natural energy into power usable for many popular electronics. It is compatible with various handheld devices, including many tablets. This USB solar charger sustains enough power to completely charge most smartphones and incompletely charge some bigger devices. This unit: Read more: Voltaic Systems 4.0W Amp 1018-C USB Portable Solar Charger
Published on Saturday, 23 April 2016 13:56
This new fully integrated solar charger is perfect solution for those wanted to utilize solar panel energy. If you plan to keep your solar energy in battery, this is the right charger to use. Capable of charging Lead Acid battery up to maximum 10A and control load of maximum 10A too. This charge controller is engineered to be durable and high efficient.
The charge controller continuously maintains the correct charge level on a 12V or 24V lead acid type backup battery, such as the 12V 7Ah battery pack, and ensure a seamless power transistion to battery power when needed. Also the charge controller allows maximum solar array current to charge into the battery, and the on board temperature sensor adjusts the charging rate based on ambient conditions.
The control circuit uses a microcontroller with intelligent control system. Charging mode uses PWM (Pulse Width Modulation) for high efficiency. Boost, recovery, and float charging are managed very easy being automatically along with the built temperature compensation to maximize battery life. The battery discharge rate is very accurately controlled, and the over-discharge voltage is continuously modify by the battery discharging rate curve.
Overload, external and internal short circuit, reverse polarity, PV panel reserve current, over charging and discharging protection of course are all built-in. In the event of short circuit or overload condition, the system will be always protected and remain 100% undamaged. Front panel LED indicators show status, and several different working modes may be set by user. It comes with English version of Getting Started Guide in the box.Read more: Arduino Solar Charger Controller
Published on Thursday, 21 February 2013 07:19
Cheap 20A solar charge controller with auto 12v or 24v (up to 480 watt) detection and lighting control.
A solar charge controller, or charge regulator is basically a voltage and / or current regulator to protect batteries from overcharging, it regulates the voltage and current coming from the solar panels going to the battery, most batteries need around 14 to 14.5 volts to get fully charged.
This solar charger can handle 12 volts and 24 volts solart systems up to 480 Watts also providing lighting control.Read more: 20A Solar charge controller 12/24V
Published on Wednesday, 23 January 2013 06:47
Cheapest solar charge controller for your small solar system only for $10.
This solar charger can automatically manage the working voltage of the solar panel and the battery of your solar system. Make sure the rated voltage of the solar panel (pin 1,2), batteries (pin 3,4) and the loads (pin 5,6) are same, and are all 12v or all 24v.
The rated current of the solar panels and the load (pin 5,6) must be less than the rated current of the solar controller (10 Amperes).
- over-load protection
- short circuit protection
- under voltage protectecion for your battery
- over-charging protection for longer battery life
- protection from the lightning strike
- reverse-polarity protection (+,-)
- suitable for small solar energy systemsRead more: Cheapest solar charge controller
- Top 5 World's Most Efficient Solar Cells
- Mono vs Poly solar panels and cells
- MPPT Regulators
- About solar charge controllers
- PIR and Light switch for solar systems
- DC Volt meter for solar sytems 7-55V
- Led driver for high power Leds (10watt)
- 10W high power led
- 12v DC CFL Bulb for PV systems
- What is kWh
- Power meter
- 10 watt Solar panel
- 10A Solar charge controller 12/24V